[Building Area]: 900m2

[Product Quantity]: 7 units

[Place of Use]: Ningbo Dongchen Automobile City Cleanroom

[Select Host]: Bruglin PM2.5 Physical Filtering Fresh Air Machine (MINI Edition)

Our factory production requires a dust-free environment, so a fresh air system must be installed. The brand of Bruglin has been heard in the past two years. After finding the dealer communication, the other party gave the plan and suggested that I install the cost-effective BGM (PM2.5 physical filter fresh air machine (MINI version)). Seven new fans are available depending on the size of the shop. Bruglin's professionalism and good service deeply touched me, so I signed the contract and started construction.

01, pre-

Design the bottom, internal communication, adjust the corresponding position of the seven machines according to the actual situation.

02, Positioning Punch


< /span>

During the positioning of the hole, I was on a business trip, and I didn’t take the first photo, but I can see it later. Bruglin's professionalism.

03, Host Installation


< /span>

The indoor and outdoor sides of the fresh air main engine should be designed with a muffler or a special silencer hose.

04, Pipeline Installation




< /span>

The indoor supervisor needs to add a fixed card for one meter spacing, and a fixed card for each side of the elbow 45 cm.

05, Debug
< /span>

The master adjusted the machine during the inspection to ensure normal function, and also used an anemometer to measure the air volume of each tuyere. The measurement, the results have reached the standard, we are very satisfied.

The picture below shows the damper protection after the installation master has commissioned.

< /span>